GePolygon Class |
Namespace: FDF.Common.Geometries
The GePolygon type exposes the following members.
Name | Description | |
---|---|---|
GePolygon | Initializes a new instance of the GePolygon class | |
GePolygon(GeCoordinateCollection) | Initializes a new instance of the GePolygon class | |
GePolygon(IGePolygon) | Initializes a new instance of the GePolygon class | |
GePolygon(IGeRing) | Initializes a new instance of the GePolygon class | |
GePolygon(IGeRing, GeRingCollection) | Initializes a new instance of the GePolygon class |
Name | Description | |
---|---|---|
AggregateType |
Returns aggregate geometry type
of this geometry.
(Overrides GeGeometryAggregateType.) | |
Area |
Returns total surface area of the geometry.
(Overrides GeGeometryArea.) | |
Centroid |
Returns geometry centroid coordinate.
(Overrides GeGeometryCentroid.) | |
DerivedType | (Overrides GeGeometryDerivedType.) | |
Dimensionality |
Gets or sets coordinate
dimensionality of a geometry.
(Overrides GeGeometryDimensionality.) | |
Envelope |
Returns geometry envelope.
(Overrides GeGeometryEnvelope.) | |
ExteriorRing |
Gets or sets polygon's exterior ring.
| |
InteriorRings |
Gets or sets polygon's interior rings.
| |
Interpolation |
Returns surface interpolation.
(Overrides GeSurfaceInterpolation.) | |
IsEmpty |
Returns True if object instance is considered empty,
otherwise returns False.
(Overrides GeGeometryIsEmpty.) | |
Length |
Returns total surface boundary length
(circumference) of the geometry.
(Overrides GeGeometryLength.) | |
Normal | (Overrides GeSurfaceNormal.) | |
Type |
Returns enumerated geometry type
used for safe typecasting to concrete geometry class.
(Overrides GeGeometryType.) |
Name | Description | |
---|---|---|
Clone | Creates a new object that is a copy of the current instance. (Overrides GeGeometryClone.) | |
ClosestPointTo | (Overrides GeGeometryClosestPointTo(GeCoordinate).) | |
Equals |
Indicates whether the current object is equal to another object of the same type.
(Overrides GeGeometryEquals(IGeGeometry, GeDimensionality, GeLength, GeSpatialComparision).) | |
GetTypeName |
Returns String representation of the underlying type.
(Overrides GeGeometryGetTypeName.) | |
Interpolate |
Interpolates surface using specified interpolation method.
(Overrides GeSurfaceInterpolate(GeInterpolation).) | |
Intersects |
Returns True if two geometries intersect each other,
otherwise returns False.
(Overrides GeGeometryIntersects(IGeGeometry, IGeGeometry).) | |
IsCoplanarTo |
Returns True if this surface is coplanar to specified surface,
otherwise returns False.
(Overrides GeSurfaceIsCoplanarTo(IGeSurface).) | |
IsParallelTo |
Returns True if this surface is parallel to specified surface,
otherwise returns False.
(Overrides GeSurfaceIsParallelTo(IGeSurface).) | |
IsValid |
Returns True if object instance is considered valid,
otherwise returns False.
(Overrides GeGeometryIsValid(FdfResultCollection, IFdfQueryable).) | |
Mirror |
Returns object that is result of mirroring of this object against
specified plane.
(Overrides GeGeometryMirror(IGePlane).) | |
Offset |
Returns geometry offset.
(Overrides GeGeometryOffset(GeLength, GePlaneOrientation).) | |
Project(GeLength) |
Returns object ortho-projected onto X-Y plane.
(Overrides GeGeometryProject(GeLength).) | |
Project(IGePlane) |
Returns object ortho-projected onto specified plane.
(Overrides GeGeometryProject(IGePlane).) | |
Project(IGePlane, IGePlane) | (Overrides GeGeometryProject(IGePlane, IGePlane).) | |
Project(IGeGeometry, IGePlane, GeVector) |
Returns True and projected geometry if this object is successfully projected onto plane
using specified direction, otherwise returns False.
(Overrides GeGeometryProject(IGeGeometry, IGePlane, GeVector).) | |
Relate |
Returns spatial relation describing the intersections of the interiors,
boundaries and exteriors of specified point
and geometry.
(Overrides GeGeometryRelate(GeCoordinate).) | |
Reverse |
Returns reversed (plane-flipped) surface with regards to
surface plane normal direction.
(Overrides GeSurfaceReverse.) | |
Rotate |
Returns object that is result of rotation of this object using specified
angle around the line with direction
vector passing through specified center
point.
(Overrides GeGeometryRotate(GeAngle, GeVector, GeCoordinate).) | |
Scale |
Returns object that is result of scaling of this object using specified
scale factor with respect to the center point.
(Overrides GeGeometryScale(Double, GeCoordinate).) | |
Transform(CrsTransform) |
Returns object that is result of transformation of this object
using specified referential coordinate transformer.
(Overrides GeGeometryTransform(CrsTransform).) | |
Transform(Int32, Int32) |
Returns object that is result of transformation of this object
using specified source and target spatial reference systems (SRS).
(Overrides GeGeometryTransform(Int32, Int32).) | |
TransformForward |
Returns object that is result of forward transformation of this object
using specified referential coordinate transform.
(Overrides GeGeometryTransformForward(CrsTransform).) | |
Translate |
Returns object that is result of translation of this object along
specified vector, given its magnitude.
(Overrides GeGeometryTranslate(GeVector).) |